Buy Tobacco Leaf Online | Whole Leaf Tobacco

Finishing tobacco

Status
Not open for further replies.

DrBob

Moderator
Founding Member
Joined
May 26, 2011
Messages
709
Points
28
Location
lewis wisconsin
Finishing tobacco to a usable product is a very important topic. The art of taking tobacco through the steps to make it good tobacco are many. From knowing when to harvest and how to harvest, how to color cure, how to store for aging, Fermenting, de-ribbing,shredding and proper storage after shredding.

I started growing my own tobacco to save on the high cost of cigarettes or cigarette tobacco. It seemed simple enough, get some seeds, grow some tobacco,dry it out and presto smoke it up,,, Free smokes!! They were free alright Heck I couldnt give em away! They smelled like burning grass, tasted like a smoldering moldy sock and made me sick to boot! I did not have anything to brag about.

It was time to learn how to make this stuff usable. I could just let it hang for a couple of years, or I could cure it. Reading up on the subject it appeared that if I could hang it in a chamber at 120 degrees and 70% humidity for about a month I would have good tobacco and not have to wait a couple of years for it to be ready.

I found many ways that had been tried but the most appealing way I found involved the use of an electric heater and a humidifier to keep the condidtions just right to speed up the aging process. I guessed that a standard crockpot should do the job of both the heater and humidifier. I struck a home run on the first attempt! I have been using the same method ever since.

I know this is not the only way, but it does work well for me.

Dr.Bob
 

Daniel

Banned
Joined
May 22, 2011
Messages
538
Points
0
Location
Nevada
The heat and humidity chamber also called a Kiln is the only way i have tried to age tobacco so far. I will second Dr. Bobs design as well. I have tried a couple of different ways to get the heat and humidity. A dish full of water and a light bulb worked for a very small container. But when i went to a refrigerator size unit. I finally went to his idea of a crock pot to get the necessary temp and moisture level. I am smoking some of Big bonners Burly as i write this. I bought that tobacco a couple of months ago and it is smokable after being kilned for just a few weeks. The kiln is the most trouble free time saving method to age tobacco i have seen mentioned. there are other ways to do it. but they either take a long time or are just as likely to ruin your tobacco.
 
Status
Not open for further replies.
Top