Whole Leaf Tobacco

Home made mold with a router and clamp

Boogeyman81

Member
Joined
Sep 23, 2019
Messages
18
Points
13
Location
Seattle
This experiment actually works pretty well and you end up with a soft box press. I used a 5/16 core box/bull nose bit on a table and ran it progressively deeper until I got the right depth. You definitely need to rotate the stick otherwise one side is flat, but if you roll the corners out before wrapping it turns out great. I should probably route a top piece with a very shallow groove, though. Used pine 1x4 and some butcher block oil.
 

Attachments

Top