AmaxB
Well-Known Member
A Lieberman? I would like to see it..
I'm off the wall Brother
- Thread starter AmaxB
- Start date
- Status
AmaxB
Well-Known Member
Not adding to my tool set did not last very long I ran across this mold yesterday and the cost was one I could not pass up.
These pictures are large but light so they should load fast.
.
.
Makes a stogie 7 inches in length I had asked the sell what the diameter was for the Cigar it makes and she replied the mold is 1 inch. Don't think she knows about Cigar Molds.
The length of the mold is 13 inches and and a 10 count. Doing a little guess math I believe the Cigar would be about 5/8ths of an inch. Perfect!
Looks to be in great condition the cost was just 36 dollars plus shipping.
These pictures are large but light so they should load fast.
.
.
Makes a stogie 7 inches in length I had asked the sell what the diameter was for the Cigar it makes and she replied the mold is 1 inch. Don't think she knows about Cigar Molds.
The length of the mold is 13 inches and and a 10 count. Doing a little guess math I believe the Cigar would be about 5/8ths of an inch. Perfect!
Looks to be in great condition the cost was just 36 dollars plus shipping.
AmaxB
Well-Known Member
Would any one happen to know who may have made this mold? I googled the number but found little.
AmaxB
Well-Known Member
An iteresting read if interested in Cigar history or device Patents... http://www.cigarhistory.info/History_of_Cigars/History_1460-1860.html
AmaxB
Well-Known Member
One last link for today Cigar Experts .. http://en.allexperts.com/q/Cigars-2143/Cigar-recipe.htm ... http://en.allexperts.com/sitesearch.htm?terms=aging+tobacco&cnl=Cigars-2143&sdn=en
You can read down through the Q & A, ask a question, or preform a search.
You can read down through the Q & A, ask a question, or preform a search.
AmaxB
Well-Known Member
It is a shame this video is not in English, this young lady really explains in great detail the rolling of a cigar.
http://www.youtube.com/watch?v=_30emTiCWKg
http://www.youtube.com/watch?v=_30emTiCWKg
MarcL
Well-Known Member
Nice one! I also ran across a mold yesterday and the cost was one I could not pass up.
I like that allexperts site. Cigarhistory.info a classic, Thank for sharing. Nice video !
I like that allexperts site. Cigarhistory.info a classic, Thank for sharing. Nice video !
jekylnz
Well-Known Member
Good score guys...it sucks that alot of sellers wont ship international on ebay...but even if they did...it would cost me twice the price of the mold in postage 
Boboro
Well-Known Member
Now thas a ce gar roller.
AmaxB
Well-Known Member
Nice MarcL it looks to be in great shape too you could not hardly buy the wood for what you paid for that one! What is the Ring size do you know?
AmaxB
Well-Known Member
Wooo had to watch the video something like 3 TIMES...
AmaxB
Well-Known Member
Got my Tuck Cutter in the mail it is a little thing!
Boboro
Well-Known Member
I woodnt have said that even if it was.
Boboro
Well-Known Member
I need 2 of em.
MarcL
Well-Known Member
Right? It started at 35 went to 30 skipped 2 weeks, 25 20 15 "click"
when I sized up the pic, it measures 46. when I did it with a similar one, I under estimated.
AmaxB
Well-Known Member
Twins oh now there is a thought and that work area is better than any dream what a selection to choose from.
AmaxB
Well-Known Member
MarcL mold looks to me like a 50 plus...
The Tuck Cutter I got in the mail yesterday works great to cut the head before smoking so I think this will be what I use it for. Am going to use it's design to improve my home made cutter..
The Tuck Cutter I got in the mail yesterday works great to cut the head before smoking so I think this will be what I use it for. Am going to use it's design to improve my home made cutter..
MarcL
Well-Known Member
I think your right. I can hardly wait to find out.
Sounds good .. look forward to see the design improvement. I can't imagine what you mean.
Sounds good .. look forward to see the design improvement. I can't imagine what you mean.
Boboro
Well-Known Member
That was a very nice work area.
AmaxB
Well-Known Member
I got the Cigar Mold from E-Bay today (not what I expected) it is a 32 ring size a half inch stogie is a bit thin for my taste. But just right for the Tuck Cutter I got the other day these must have been a pair.
I was in the middle of making another Tuck Cutter (but refined) when the mold came. Upon seeing the size I had an OOOPs moment than took a ride to buy a 5/8 bull nose router bit (I don't want dainty stogies)
while getting this bit I got a 5/8 square channel bit as well.
I spent the rest of the day opening up the channels in the bottom half of my oops mold (what a B) i would prefer to make it from scratch, I got one channel on the top half done than fitted the two halfs
to check for round and alignment it looks like I'm going to get away with it. I'll finish it up tomorrow had enough for one day, on the bright side I now have the bits to copy this mold but in a ring 40 (5/8th)
I like a 40 - 42 size.
I was in the middle of making another Tuck Cutter (but refined) when the mold came. Upon seeing the size I had an OOOPs moment than took a ride to buy a 5/8 bull nose router bit (I don't want dainty stogies)
while getting this bit I got a 5/8 square channel bit as well.
I spent the rest of the day opening up the channels in the bottom half of my oops mold (what a B) i would prefer to make it from scratch, I got one channel on the top half done than fitted the two halfs
to check for round and alignment it looks like I'm going to get away with it. I'll finish it up tomorrow had enough for one day, on the bright side I now have the bits to copy this mold but in a ring 40 (5/8th)
I like a 40 - 42 size.
- Status